Diaphragm
Cell Blankets
(Grid Covers)
The World Leader in Grid
Protection Technology for Chlor-Alkali
Diaphragm Cells |
|
Specification
Information
Mark
I and Mark II Series
1. Grid Cover Elastomers, 1/4" thick,
available compounds:
• 6962 Special EPDM
• 6760 Special EPDM
• HK-94N EPDM
2.
Bottom Seals
• 6055 Special EPDM Ribbed, Easy to
Seal. Available in 1-1/2", 2",
3" Widths
• Half Round available in 3/4"
or 1/2" thick
3.
No Drip Trims,
• EPDM Triangles, available in 3/4"
or 1/2"
Mark I
Features the original design at an economical
cost.
Mark II
Features Superior Sealability with a Easy
to Seal Bottom Seal.
Mark III and Mark III+ Series
1. Grid Cover Elastomer, 6962 Special EPDM,
available in 3/16" or 1/4" thick
2. Anode Post Gaskets, 6962 Special EPDM,
used with 3/16" thick base
3. F230LP, Fluoroplastic Face
4.
Bottom Seal available in:
• 6055 Special EPDM bonded
• 6055 or 6040 special EPDM with location
Groove, and 3/4" half Round bonded
to the blanket for the purpose of locating
the 6055 or 6040 Seal
Mark III
Features long life suitable for use with
long life Diaphragms, or with difficult
cell circumstances, where unprotected Elastomers
have insufficient life.
Mark III+
Features the Mark III benefits, plus a replacable
Bottom Seal, where the Bottom Seal life
is less than half the life of the F230LP
"Armored Blanket"
ALL
PRINCE RUBBER & PLASTIC BLANKETS ARE
BRANDED TO IDENTIFY THE CONSTRUCTION DATE
AND THE MATERIAL OF CONSTRUCTION
ADDITIONAL
SPECIFICATIONS ON THESE ITEMS ARE CONTAINED
ON OTHER PRINCE LITERATURE
